New Alfa Romeo TZ3 Corsa Concept unveiled at Villa D'Este

The Zagato-designed Alfa Romeo TZ3 Corsa has been unveiled at the Villa D'Este concours, and frankly, it's spectacular. Driven by the Alfa 8C Competizione's V8, the TZ3 is very much in keeping with its 60s-era predecessors, the TZ1 and TZ2, sporting similar detail elements and the same near-breadvan profile. Also like the originals, this is a legit racing car. Unlike its forbears, however, the new machine wears aluminum bodywork stretched over a tube frame and carbon-fiber chassis. Power, as indicated before, is also of thoroughly modern origin.

Zagato says the TZ3 was commissioned by German collector Martin Kapp as a special celebration of 100 years of racing from Scuderia Ferrari, Alfa Corse, Autodelta, and Scuderia Zagato. On that "special" bit, we think it's safe to say, "mission accomplished" - with class and panache to spare. Official PR pics are in the gallery below, and a full live gallery is posted at OmniAuto. Be sure to pay them a visit as well.

via:autoblog





Press Release

Show full PR text
Milano, April 2010: Zagato Atelier announces the introduction of the Alfa Romeo TZ3 Corsa at
the XII Villa D'Este Concours d'Elegance.

The TZ3 Corsa is not a design exercise.
It does not take inspiration only from the 90 year collaboration between the two brands, neither only
from the Milanese conjunction between Alfa Romeo and Zagato.
The TZ3 Corsa is a race car, honouring 100 years of races and victories across the whole 20th
century.

It celebrates men and machines of the Alfa Romeo Zagato common tradition:
Scuderia Ferrari of the 20's and 30's, Alfa Corse of the 40's and 50's, Autodelta of the 60's and
70's up to the latest Scuderia Zagato of the 80's and 90's.

Recalling these racing emotions, the TZ3 Corsa is based on a mono shell carbon fibre tubular
chassis, coupled with a tubular frame and a lightweight aluminium body.
It boasts Technical Partners such as OMP and Pirelli.

Following Zagato's gentlemen-driver heritage, the car has been commissioned by the Alfa Romeo
Zagato collector Martin Kapp, during the Zandvoort Tribute to Zagato event, where more than
130 Alfa Romeo Zagatos were celebrating the 90th Anniversary of the brand.
Martin Kapp owns, among his Alfa Romeo Collection: SZ coda tonda and SZ coda tronca, TZ
and TZ2, Junior Z and S.Z..

Tribute to the 100th anniversary of Alfa Romeo's Racing Heritage:
Alfa Romeo and Zagato achieved the best results since the beginnings thanks to the Mille Miglia
victories of the 1500 6C, the 1750 GS and the 8C 2300 Zagato of the Scuderia Ferrari. Already
in 1933 an official advert of the Alfa Romeo 8C proclaimed: "The Spider that, with the trio Alfa
Romeo - Scuderia Ferrari - Carrozzeria Zagato, brought countless victories in the homeland and
abroad for the honour of Italy."

Even the grandiose Quadrifoglio Verde was placed on the bodies of Zagatos of the Alfa Corse
team numerous times. Among the most glorious moments is the victory of the Formula 1
championship of Juan Manuel Fangio, aboard his Alfa Romeo 159 bodied by Zagato, as well as
the victorious Alfa Romeo 3000 CM bodied in 3 samples by Zagato.

During the 60's, the list of absolute victories of the Giulia TZ and TZ2 by Zagato for the Autodelta
of Ing. Carlo Chiti, was never-ending. Some of the most memorable victories included the 1964 12
hours of Sebring, the Targa Florio, the Nurburgring, and the 24 hours of Le Mans.
The single-brand Alfa Romeo S.Z. championship emphasized the Alfa Romeo ES30's
(Experimental SportsCar 3000) technical and dynamic abilities. The S.Z. delivered, and continues
to so today, constant performance and driving pleasure to the Gentlemen drivers of the Alfa Zagato
team, across the most important racetracks in Europe.

2010 Caterham Seven Lambretta Special Edition

English car company Caterham Cars will be releasing a special edition of the Caterham Seven later this year.

The Lambretta Special Edition uses a 1.6 liter Ford Sigma powerplant, which delivers 125 hp and 120 lb-ft of torque. The unit is matted to a five speed manual gearbox and pushes the car to 60 mph in six seconds. The trendy Caterham uses a “purposeful chassis” that allows it to offer exceptional handling.

The Caterham Seven sportcar from Lambretta features a unique body paint, a combination of red, white and blue, based on the Union Jack. The same combination is used on the decals and livery, leather seats, dash, carpets and boot allowing for a proper homage to the heritage of the U.K.


Caterham Special Edition Seven exterior features a unique paints that includes with decals that matches leather seats, dashboard, carpet and boot.

The price for this special edition is £26,995.





Press Release

LAMBRETTA'S TAKE ON A CATERHAM SEVEN

Caterham Cars has teamed up with another iconic British company, Lambretta Clothing, to give its legendary Seven sportscar a visual overhaul for a unique 2010 Special Edition.

The British-owned fashion label, which is based in London's famous Carnaby Street, has drawn on its characteristic flair and rich heritage in popular culture to create a bespoke, custom-tailored Caterham, which screams ‘Britannia'.

The body paint, decals and livery leave you in no doubt of its geographic heritage with the Union Jack's unmistakable hue of red, white and blue dressing the paintwork.

Naturally, the theme continues inside with a matching colour scheme spanning the leather seats, dash, carpets and boot. Hand-stitched seat piping, embossed Lambretta motifs and a stylish Moto-Lita steering wheel finish the interior detailing.

Under the skin, the engineering is pure Caterham.

Powered by a 1.6-litre Ford Sigma engine, which pushes out 125bhp, the Lambretta Special Edition can call upon 120lbs ft of torque to propel its lightweight frame to 60mph in six seconds. The marriage of a quick-fire five-speed gearbox, with a purposeful chassis, provides the responsiveness and handling characteristics every Seven is famous for.

Available immediately, the Caterham Seven Lambretta Special Edition is priced at £26,995 OTR.

Lambretta's managing director, Rob Harmer explained: "Designing the exterior and interior of a car is an entirely different challenge to our core business of fashion and accessories, but there are clearly some shared philosophies between the two companies, which made this collaboration so exciting."

Lawrence Tomlinson adds to growing automotive portfolio

Iconic British car marque Ginetta, has extended its road car proposition by acquiring Bath-based supercar manufacturer Farbio Sports Cars. Driving the potential deal is Ginetta Chairman Lawrence Tomlinson, who acquired Ginetta in 2005 and has pushed the sports car maker to new levels.

With three highly successful one-make championships and the GT winning G50 which has beaten the likes of Aston Martin, the Leeds-based manufacturer has become a major player on the global motorsport scene.

Meanwhile, Farbio, which was established in 2005 by former racing driver Chris Marsh, offers a stunning lightweight British supercar in the form of the Farbio GTS and its enhanced performance models the GTS350 and GTS400. The cars unique selling point comes in its ground-breaking carbon fibre body which is manufactured at specialist facilities at Farbio's Bath factory - and ensures that the cars are lighter than an average Ford Fiesta at just 1048 kg.


With the top of the range GTS400 reaching an impressive 410bhp, Farbio has produced a super quick road car with the handling of a race car. It has received phenomenal press reviews, with the Sunday Times calling the GTS400 "one of the best cars this country has ever produced". Farbio has already set up an impressive worldwide Dealer Network and the fusion of the two marques will add to the global presence of the automotive group. A rebadged Ginetta F400 was unveiled today at Silverstone by Tomlinson and Marsh

Chairman Lawrence Tomlinson said: "I have been continually impressed by Farbio - Chris Marsh and his team have established a car which incorporates complex design with obvious beauty. The acquisition by Ginetta will mean that we can further develop on the existing carbon fibre component facility which is housed at Bath whilst using Ginetta's considerable motorsport credentials and inherently strong brand identity to propel a road car to international acclaim. I am very confident that bringing Farbio under the Ginetta marque will be an incredibly positive move."

Managing Director, Chris Marsh has followed the Ginetta brand since its acquisition by Tomlinson. He added "The accomplishments that have been made by Ginetta have been fantastic. I have been following Lawrence's achievements over the past years, having been at Le Mans for his first win in 2006 and am very much looking forward to working with him and his team to expand and develop the brand. Both companies will mutually benefit from their individual qualities and strengths resulting in a strong and enhanced global position in the sports car market".

Chris Marsh will remain as Managing Director with the existing team set to expand significantly. The Farbio brand will be re-named Ginetta.


About Ginetta

Ginetta is an iconic British sports car manufacturer which has been building road and race cars since 1958.

Today the Yorkshire-based company is a major player on the motorsport scene in the UK and abroad. Its own three single-make Championships, two of which support the prestigious BTCC series, are renowned for their entertaining close racing.

Multi-marque racing at GT level with the G50 and the Ginetta-Zytek's LMP1 and LMP2 cars complete the career ladder opportunities starting from 14 years old in the Ginetta Junior car.

In 2008 Ginetta Cars was awarded the title of ‘Small Business of the Year' by the Motorsport Industry Association and in the same year the Ginetta G50 was crowned Autosport's Car of the Year. In June 2009, Team LNT raced a Ginetta-Zytek GZ09S in the premier LMP1 class at Le Mans with Formula One icon Nigel Mansell competing in the same car at the Le Mans Series finale in September.

Ginetta's latest launch the G40, was unveiled to international acclaim at Autosport International in January 2010. The multi-platform road and race car will hit grids in April 2010.
More Photos

Geneva 2010: NLV Quant Concept

The second generation NVL Quant made its public debut in front of media yesterday in Geneva, bringing with it what NVL Solar, its creator, calls "a breakthrough the market eagerly has been anticipating for years." While this last statement is a matter of interpretation, the Quant does bring a range of interesting features. The most exciting thing about it, however, is the promise to turn production version rather sooner than later.


Set to be production ready next year, the Quant was designed to prove "cutting-edge supercars can combine speed, comfort and enjoyment with environmental integrity." It features two different battery systems ("a long-life metal-air battery or a rechargeable redox flow cell"), four torque-vectoring electric motors, a full carbon fiber chassis, and a revolutionary thin-film coated photovoltaic body.


The Quant has some initial performance figures which would give a regular, internal combustion engined supercar, a good run for its money: 2.8 seconds 0-100 km/h acceleration time and a top speed of 377 km/h (234 mph).


The latter converts light into electricity to supply the operating electronics and the battery. While it's a bit technical, NLV says the coating has "an average photovoltaic conversion efficiency of 38%, depending on ambient conditions, and a peak performance of over 50%." More importantly, the company believes they can tune the material's absorption characteristics to create multiple layers with their own unique absorption frequency. As impressive as this is, NLV estimates the film will have a degradation coefficient of only 5-6% over 20 years.


The Quant comes with four airbags, ABS and ESP, two infotainment panels for the rear seats, zone Climate Control system, LED front and rear lights and, la piece de resistance, NLV photovoltaic thin film solar coating all over the body of the car.


More Photos



Press Release

NLV Solar AG, a pioneer in photovoltaics and accumulator technology, have joined forces to create the Quant sport. The brainchild of this marriage of power and energy is a four-seater electric car - a breakthrough the market eagerly has been anticipating for years. A prototype is to be unveiled at the Motor Show Geneva 2010, with currently working to scale up for series production.

The NLV Quant is an exciting, revolutionary automotive project. Within the coming year, the NLV Quant will be fully engineered and ready for production. You can follow the last few stages. The design, drive system, range and photovoltaics of the Quant are already spectacular and record-breaking as individual components, and we believe that together they will mark a milestone in automotive history.

Technics

The NLV Quant is proof that cutting-edge supercars can combine speed, comfort and enjoyment with environmental integrity. It implents the mobile energy technology of the future. The NLV Quant has two different battery systems, a torque vectoring with 4 electric motors and a full carbon chassis. A thin-film coated photvoltaic car body supplies the operating electronics and also supports the battery. Gull-wing doors provide easy access to all four passengers.

Carbon Chassis

A reason for the car's low weight is the utilisation of a carbon-fibre monotube backbone chassis, construction, which houses the FAES system safely inside the centreline of the car at the lowest possible position, bringing down the centre of gravity and central mass point.

Using tradition lay-up, the vacuum bag generates the pressure for consolidating the carbon plies. In RTM process there are two moulds and the pressure comes only from the resin pump. The design becomes quite critical as inner and outer skin has to be perfectly defines in order to have a designed volume matching exactly the tooling volume. The risk is to have voids generated by not precise fitting of the inner cores.

Thin Film

The NLV Quant is coated with a thin film made of pyrite, which converts light into electricity to supply the operating electronics and also support the battery. This innovative pyrite technology is cost-effective, efficient and ecological.

NLV Solar AG has developed an iron-sulphur composite semiconductor using digital prototyping, with very promising results. The research indicates:

• an average photovoltaic conversion efficiency of 38%, depending on ambient conditions, and a peak performance of over 50%

• the possibility of fine-tuning the material's absorption characteristics by modification of its crystal lattice structure using ion implantation; stacked in a multilayer thin-film cell, it would be possible to tune each layer to a different target absorption frequency

• as a thin-film cell, the material could be applied to substrates in a transparent, semi-transparent or tinted coating

• the projected degradation coefficient is only 5-6% over 20 years

Electric Power

The NLV Quant allows for the modular installation of either a long-life metal-air battery or a rechargeable redox flow cell. These are both future-oriented, secure energy sources which help give the Quant exceptional power and range.

Speed

The projected curb weight of 1680 kg is very light considering that it is a battery-powered, four-seater, luxury performance car. This is partly due to the four-motor installation- a remarkable achievement which allows the NLV Quant to deliver 0-100 km/h in 2.8 seconds and hit a top speed of 377 km/h.

Gullwing

The gull-wing doors set the NLV Quant apart from any other four-seaters on the market. As well as being a stylish feature, they also make entry to the car more ergonomic, thanks to the lack of B-pillars. They provide easy access to both the front and rear passenger seats. The unique split side-lite feature allows either passenger to open and close the front and rear side windows separately, despite the fact that there is only one door per side.

Preliminary Specs

• Power: 600 kW ( 4x 150 kW), 800 bhp
• Rotation speed 12'000 U/min
• Torque: 1500 nm
• 0-100 km/h: 2,8 seconds
• Top speed: 377 km/h
• Curb weight: 1680 kg
• Wheelbase 3102 mm
• Track - Front: 1730 mm; rear: 1729 mm
• Wheels/tyres ? front: 245/35 - 23"; rear: 285/30 - 23" - low friction tyres
• Width: 2016 mm incl. rear-view mirrors; length: 4879 mm; height: 1335 mm
• Rear-wheel drive
• Four-wheel brake regeneration
• Minimum 4 airbags, ABS and ESP and torque vectoring
• 2 infotainment panels Adjustable rear seats
• 3 zone Climate Control system
• Generous leg room in the rear
• LED front and rear lights
• Body covered in NLV photovoltaic thin film solar coating
• Accumulator with cooling liquid (weight ca. 500kg)
• Operating voltage 420 V
• Inverter voltage 350 V
• Price: TBD

Features

• NLV Quant has two different battery systems: on the one hand, purely conventional accumulator technology with a transition metal and air mixture, and on the other hand, a pure redox flow cell

• Thin-film photovoltaic coating of car body and windows

• Torque vectoring with 4 electric motors for wheel-specific torque distribution to enhance the vehicle's agility and stability

• Full Carbon chassis and carbon body

• Minimised running and manufacturing costs thanks to new technology

• Optimised safety

• Unique/functional design, vehicle comfort and loading capacity

Protoscar unveils its electric sports car prototype LAMPO2 at the Geneva Motor Show 2010

LAMPO2 is an electric demonstration sports car conceived by Protoscar (www.protoscar.com), a Swiss company which has been developing CleanCar projects for 23 years including consulting of OEMs, power utilities and governments. The LAMPO2 boasts "quick-charging" capability (up to 100 km range extension in just 10 minutes charging time) and will be presented at the Geneva Motor Show (2nd March 2010) on the e'mobile stand Nr. 5141.

LAMPO2 is an even more energy efficient successor to the LAMPO demonstration vehicle presented in 2009. Weight, aerodynamics and the efficiency of individual components of the BRUSA drive train have been further optimized in order to reach a world-class energy consumption of less than 100Wh/km-ton under real conditions.


LAMPO2 is equipped with 4 different charging modes:

• standard single-phase with up to 3,3kW on board charger for typical overnight home-charge,

• "control-pilot" equipped and (EDF provided) PLC single-phase with 6,6kW on board charger typical for public charging,

• standard three-phase 9,9kW on board charger typical for charging at industrial plugs (fleet-owners) and

• an interface for DC fast charging (able to transmit a max. power of 80kW), where up to 100km of additional range can be charged within just 10 minutes, by an off-board system, so that the different solutions can be compared in terms of usability and efficiency by being demonstrated in real conditions.

LAMPO2 will be shown together with different charging infrastructure solutions: a smart home charge device (developed with ALPIQ), the public charging station E-TOTEM and the quick-charging station (developed with ABB and Brusa).

LAMPO2 impressively demonstrates that electric drive-trains are mature and perform sufficiently well to be a solution for all types of vehicles, not just city cars. This includes premium cars, the segment through which most new technologies have successfully been introduced into the market.


Together with the first LAMPO (which has already been driven over 10'000 km on race tracks and public roads across Europe), LAMPO2 will be used for practical demonstrations and testing. Protoscar has repeatedly been encouraged to develop an advanced electric cabriolet for small-scale production and plans to use the LAMPO2 to evaluate this possibility. The evaluation will include discussions with potential industrial and financial partners, and an assessment of the preferences and desires of potential clients.

In addition to BRUSA, which supplies the components of the whole drive train, the main partners and sponsors of the LAMPO2 project are ALPIQ (the leading Swiss company in power generation and distribution, which is actively promoting the goal of 15% of electric vehicles in Switzerland by 2020), the German Fraunhofer Institute IAO (EV-specific features and MMI, as well as optimization of the ergonomics), ABB (DC fast-charging technology) and the Swiss Federal Office of Energy.


Technical details

LAMPO2 has two electric motors (allowing it to operate as a four-wheel drive with variable torque between front and rear axle for optimal handling, safety and efficiency) with a total output of 300 kW (equivalent to 408 HP), 640 Nm (over 50% more than its predecessor!) and over 30 kWh of Lithium-Ion battery capacity. LAMPO2 features real sports-car performances: 5 seconds to accelerate from 0 to 100 km/h, 200 km/h of max. speed and a range of over 200 km. More than enough energy for driving is produced by a remote solar plant which is installed on the roof of a farm in Tuscany, allowing a real zero-emission drive on a "Well-to-Wheel" basis.

More Photos

Geneva Preview: Hennessey Venom GT

Hennessey Performance Venom GT fans won't be pleased to learn that the upcoming hypercar is not coming to the Geneva Motor Show next month, no thanks apparently, to a lack of exhibition space at the event. Autoblog reports that HP will instead showcase the Venom GT for the first time at the Goodwood Festival of Speed in the UK this July. US fans will get their first glimpse in Monterey.


The car is said to achieve power figures of around 746kW (1,000bhp) while peak torque is 1,288Nm (950 lb-ft) at 4,800rpm. It's all sent to the rear wheels from a 6-speed manual transmission.


Final testing is still going on so hopefully more concrete performance figures will be confirmed over the coming weeks.


More Photos

Video: Next Generation Concept IndyCar Unveiled in Chicago

DeltaWing LLC, of Indianapolis, introduced the future of open wheel racing today at the Chicago Auto Show, aimed at realigning America's premiere racing tradition with current automobile industry and consumer trends. DeltaWing calls on technological innovation to return racing to cutting edge relevance in the search for extreme performance with less environmental and financial resources.

"Today marks a fundamental shift in how race fans and the general public will view all racing cars in the future; this is a game changer" said Dan Partel, Chief Executive Officer of DeltaWing LLC. "This radical prototype takes open wheel racing to a new level from both an engineering standpoint and the overall spectator experience."

The car also marks the next step in the industry's dedication to becoming more environmentally responsible. DeltaWing has identified that this marketplace trend can be applied to the IZOD IndyCar Series and has developed this concept car using the most advanced American technology.

By targeting reduced aerodynamic drag and lighter weight, the DeltaWing design achieves record breaking on track performance with only half the engine power of its recent predecessors. The unique vehicle design provides optimum and consistent distribution of loading for the Firestone Firehawk tires, which are specifically developed for the dynamic characteristics of the DeltaWing racer. The futuristic form aims to appeal to a younger demographic audience who is increasingly in search of technological innovations to solve the requirement for sustainable personal mobility. DeltaWing LLC will design, engineer and supply a running prototype by August, 2010.
Revolutionary design from every angle

• Ultra narrow front track design saves weight, while fairings for the Firestone tires reduces aerodynamic drag and prevents wheel interlocking

• Delta plan view shape provides undisturbed airflow to the downforce generating ground effect underbody venturi located beneath the car's center of gravity just ahead of the widely spaced rear wheels. Highly efficient downforce with negligible wake ensures minimal loss of aerodynamic performance for a trailing car thus enhancing the on-track overtaking spectacle

* Uncluttered side view with rearwards driver location provides ideal sponsorship positioning and true single-seater appeal. The highly prominent tail fin replaces the conventional inverted aerofoil in order to broaden the yaw stability envelope without inducing aerodynamic drag on straight-aways

"We are confident that this car will outperform the current generation IndyCar and do it in a more environmentally friendly way," said Partel. "Auto racing has always been a powerful marketing tool for propelling new technology into the hearts and minds of consumers. This new car was specifically designed to be more closely aligned with the new reality of automobiles that are arriving on the road today. Consumers are choosing cars that provide impressive performance capabilities but with greater fuel efficiency. This prototype IndyCar features those same characteristics, making it much more relevant to the public and the auto industry. It is our goal to make participation in the series highly attractive to the automobile manufacturers as well as the fuel, technology, information and entertainment corporate sectors."

DeltaWing anticipates the final car will weigh a remarkable 50 percent less than the current generation IndyCar and crucially, generate only half of the aerodynamic drag. This combination requires substantially less horsepower to generate speeds of over 235 miles per hour while delivering a 100% improvement in fuel efficiency.

"Our goal is to have our first prototype on the track in August," said Partel. "We look forward to an exciting development project with the Indy Racing League to ensure that all of their requirements are met for DeltaWing to become the next IZOD IndyCar in 2012."

"Today, we saw the future of racing unveiled", said Bill Lafontaine, Chief Marketing Officer. "This revolutionary car and business concept ushers in a new era in racing and reinforces the strong tradition of innovation in open wheel racing. This initiative reaffirms America's ability to lead in the automotive field. We look forward to the development of the car and our first running prototype."


About the DeltaWing IndyCar Prototype

Initial concept work by Ben Bowlby started with a clean sheet approach and began in January, 2009 at Target Chip Ganassi Racing in Indianapolis. The first prototype car will be powered by a 2.0 liter 4 cylinder turbocharged engine. Final horsepower figures will be based on the car's performance on the track, but by using state-of-the-art computer modeling, it is anticipated that the engine will need to produce approximately 300 horsepower to attain the performance targets and will run over 4,000 miles before requiring a rebuild, a dramatic 100% improvement over the current engine.

"The DeltaWing Concept is more than just a new and exciting racing car; it is about creating a platform that moves racing into the new era of information entertainment", said Bowlby, Designer and Chief Technology Officer. "Once we have successfully production engineered and manufactured the first generation of team cars, those cars will form the beginning of a constant evolution formula. Our intention is to publish the entire design detail via the DeltaWing website where access will be available to everyone and so provide a unique participation opportunity and insight into the engineering world of modern racing cars. Just as we hope to see multiple engine suppliers with different configurations and displacements, we also hope to create a framework that will allow us to see a varied and ever changing grid of racing machines in a sustainable, cost controlled and high value manner. We will be unveiling these plans once the prototype is up and running. As we design the DeltaWing prototype, safety, efficiency, value and cost are our main priorities; the goal is that more teams and drivers will have the opportunity to compete in the IZOD IndyCar series. At this point we anticipate a complete car with engine will sell for $600,000."


Key Specifications (estimated)

• Weight with driver: 1,030 lbs.

• Horsepower: 300 BHP

• Wheel base: 125 inches

• Front track: 24 inches

• Rear track: 70 inches

• Aerodynamic drag: Cd 0.24

Key Technical features

• Engine and transmission are "non-stressed members" of the chassis structural design which allows teams to install a wide variety of lightweight powertrains

• The prototype will feature a 4 cylinder turbo charged engine that will produce approximately 300 horsepower at 7,000 rpm and weigh only 160lbs fully dressed

• Engine capacity, RPM and configuration freedoms are anticipated given only that the rate of fuel delivery to the engine will be controlled by a specially developed fuel flow rate control unit

• Vehicle weight distribution is necessarily more rearward than traditionally seen with 72.5% of the mass on the larger rear tires

• 80% of the aerodynamic downforce acts on the rear of the car

• Inline traction under acceleration through the rear tires is greatly enhanced by rearward weight and aerodynamic distributions

• Unique amongst today's racing cars 60% of braking force is generated behind the center of gravity giving a dynamically stable response

• Locking propensity of the inside front wheel on corner entry is greatly reduced

• Transission features 6 speed oval and 5 speed plus reverse road track configurations with sequential paddle shift actuation

• Differential features full torque vectoring active technology with driver control of gain for balance adjustment. "Active stagger" removes the expensive necessity for staggered rear tire diameters for ovals

• Advanced computer modeling of structures, impact energy management, aerodynamics, vehicle dynamics and tires has been used to develop the virtual DeltaWing car

• The car's performance has been simulated on each configuration of race track encountered during the IZOD IndyCar Series Championship

• Modern advanced materials and CNC construction techniques applied to achieve gains in light weight structures and occupant safety

• Driver position, restraint layout and energy absorbency facility designed with the latest data on survival criteria

Visit www.deltawingracing.com for additional information and to follow progress on the design and development of the concept


More Photos

2012 IndyCar Swift Concepts [Video]

San Clemente, California - USA February 2010

American race car company, Swift Engineering, Inc. is proud to announce key motorsport partnerships with industry leading companies to further its bid to design and build the next generation race car chassis for the 2012 IZOD IndyCar Series ®.

"Given Swift is the leading US race car design and manufacturing company and our 27-year history was founded in motorsport, it is only natural that we aspire to partner with the nations' premier open-wheel formula, the IZOD IndyCar Series," Jan Wesley Refsdal, Swift's president said.


Key business alliances have been cemented between Swift and Cray Inc. (The Supercomputer Company), Indianapolis-based Mark One Composites, Inc. and Cruden America, world leaders in motion racing simulators

"Individually, each one of these partnerships is critical to Swift's continuing commitment to motorsport; however, collectively and in conjunction with one another they will help us set new industry standards in innovative design, manufacturing and support," Refsdal stated.


Swift's strategic industry partnerships were carefully selected and cultivated through a focused effort to realize the challenge the IZOD IndyCar Series has set for its next generation car.

Cray supercomputers will be used at Swift's facility to further enhance its capabilities in Computational Fluid Dynamics (CFD), an important tool in the design and development of aerodynamic concepts. In conjunction with Swift's existing on-site wind tunnel designs will be tested in accurate virtual models allowing for valuable driver feedback and performance data collection on Cruden's state-of-the-art 3Ctr 6-DOF motion racing simulator which is soon to be operational at Swift.


"Speed-to-market is critical in any business, but probably more so in racing as the green flag doesn't wait for anyone," Refsdal said. "Rapid development is just as much about the speed and quality of the design process as it is manufacturing. We are evolving our four-year exclusive certified composite repair relationship with Mark One Composites, Inc. to provide further manufacturing and inventory support directly to teams from its Indianapolis-based facility."


More Photos

Video: 2010 Matech Ford GT1 unveiled

As early as 2009, before the regulations of the new GT Championship came into force, Matech Concepts started developing a new Ford GT1 based on the prototype fielded in the previous season. On the way to the Portuguese circuit at Portimão, Matech Competition stopped in Spain at the Ascari circuit to perform the roll-out of the new car. With Thomas Mutsch at the wheel, the first metres of the Ford GT1 went according to plan, just as the driver and Martin Bartek had been hoping:


"The car is completely new. Not a single element, be it the engine, the transmission system, the suspension or aerodynamics are the same as those of the Ford GT1 from 2009. The roll-out was very promising, and we are confident with regard the forthcoming season." The next step will be the "balance of performance" at Portimão on 3 and 4 February, followed by further testing at the Alcañiz circuit where a handful of previously selected drivers will take the wheel of the Ford GT1. This first stage will then be concluded by the presentation of the vehicle to the press in Paris on 1 March.


The driver pairings...
To determine the final line-up for the cockpits of the two Ford GT1 cars, Matech Competition has invited seven drivers to participate in a comparative test in a "special" Ford GT3 on the Portimão circuit. In addition to the five men - Mathias Beche, Yann Zimmer, Borja Garcia, Casper Elgaard and Carlo Van Dam - the group also includes two ladies, Natacha Gachnang and Cyndie Allemann. ‘'Our goal, clearly, is to form two teams that are as strong as possible by giving young drivers, including women, an opportunity to compete.


For these tests, they will be driving one of our Ford GT3 cars on which we have removed the ballast and the air-restrictor so that it will handle in a similar way on the track as the GT1," explains Martin Bartek. After this initial evaluation, there will be some candidates for further tests, this time in the Ford GT1 at the Motorland circuit near Alcañiz. Jonathan Hirschi and Marc Hennerici will join this test as well.


via:world car fans

Video: Lamborghini Ad Personam Programme Promo Revealed

Lamborghini has released a new video to support their "Ad Personam" program. The plan, which translates from Latin as "To the person," offers customers the opportunity to select from a variety of exclusive options.


The options include an extensive variety of choice in exterior color, leather tone, and stitching hue. As the video points out, one thing that will not be changed is Sant'Agata, Bolognese, where each hand built Lamborghini is still assembled.


Lamborghini makes Ad Personam available, for a fee, to those customers who need an extra level of exclusivity. Launched at NAIAS in 2008, the only limiting factor to the options is the customer's available cash.


More Photos